DIY Tips for Air Conditioning Repair
When you call an HVAC technician to fix your air conditioning, there are several steps they go through to troubleshoot issues. These steps are simple ones that you as a homeowner can take charge and do before you call the technician.
Often times, when troubleshooting your unit with these steps, you can solve issues and save yourself a bigger bill at the same time. Try each of the pro tips below when you notice issues with your unit before calling for professional services.
Check Your Thermostat for Problems
First, check to make sure it’s not in the “off” position. If the unit got bumped or reset due to a power outage, it could be off. Second, check the battery. If the unit’s battery is running low, it may not have enough power to run your air conditioning.
Change the batteries and check to see if your thermostat starts working properly. Finally, check the wiring hooked up to your unit. If it has come disconnected or been chewed through, it’s not going to function properly and your air conditioning will not function properly, either.
Change Air Filter Monthly
Your HVAC unit is equipped with at least one air filter. This is important to know because this is the piece that filters dust, debris, allergens, and mold spores out of the air you breathe. When air circulates through the HVAC unit, it makes the air inside your house easier to breathe. What this means, however, is that over time the filter will fill up with the dust and dander it’s filtering out of the air.
When left for a month, it reaches its maximum capacity to filter the air. At this point, it’s having to work harder to continue circulating and filtering the air. Eventually, the filter won’t be able to trap any more debris from the air, and the unit will draw much more power to work properly. Filters are only meant to last for one month before they need to be changed. By changing your filter each month, you keep your system working optimally, and help ensure proper functioning for years to come.
Frequently Clean AC System
When dirt, grass clippings, leaves, and debris coats the fan blades of the condenser, the machine has to work much harder in order to cool the air coming through the system before it gets pumped back into your house.
When cleaning, be sure to disconnect the power source from your unit. Remove any large debris by hand, and hose the dirt and dust accumulated on the machine.
Trusted, Reliable HVAC Technicians
C. Woods Company has served Tyler, TX, since 1956 for all their plumbing, heating, and cooling needs. They offer water heater maintenance, installation, and repair, drain cleaning, AC repair, and heating repair. Their technicians are courteous and friendly, they’ll offer personalized solutions, and they’ll get the job done right the first time.